Optec, Inc.
SSP Accessories
SSP Information
Navigator
Store your valuable instrument in a solid hardwood case made from various Michigan
hardwoods such as elm, walnut, oak or maple supplied from a local wood mill.
The case contains enough room for the instrument, power supply, PC cable and
extra filter sliders. A rechargeable desiccant container keeps the instrument
dry. A neoprene gasket keeps all dust from entering the case. All brass hardware.
Quality American made for a change!
#17200 SSP-3 or SSP-4
#17205 SSP-5
#17210 SSP-3A
#17215 SSP-5A
Null modem cable with female DB-9 connectors on both ends. This cable is need
to connect the SSP to the COM port of a computer.
#17154 6-feet
#17155
10-feet
#17156 15-feet
#17157 25-feet
custom lengths available
USB to Serial Converter adapts the SSP serial output to a USB 2.0 interface.
Single port converter.
#17690
4-Port USB to Serial Converter adapts the SSP serial output to a USB 2.0 interface.
Four seperate COM ports allow all of the Optec instruments to interface to a
single USB port.
#17691
IMPORTANT: Not all USB-to-Serial converters are compatible with Optec software.
We have found that those with the FTDI chip set are compatible and the models
Optec sells use this chip set. Those with the Prolific chip set are not compatible.
This limitation only effects Optec control software and not the software from
other parties such as CCDSoft or MaximDL.
