Optec, Inc.
Laser Engraving and Cutting
Optec Incorporated has a Versa Laser system for engraving and cutting which
is very much under utilized. Because of the speed and sophistication of this
unit, it does everything we need at Optec in very short time and sits idle most
of the day. Our excess capacity with this technology may benefit your company
if you need engraving and/or cutting services. We can import your AutoCad drawing
and be up and running in a very short time. Contact us with your requirements
and give us a chance to quote. You may be pleased on how little it will cost.
The Versa LASER system can cut a wide range of plastic, wood and composite materials
with exceptional accuracy and speed. These 66 small oval diffusers measuring
about 1-inch by 0.5-inch were cut from 1/8-inch thick opal acrylic in less than
10 minutes. If you do not have AutoCad capability, we can do the drawing profile
from your specifications. We can handle up to 12 x 16 inch material.
Aluminum anodized surfaces can be marked with any design and lettering for product
identification. Both flat and round surfaces can be marked. Click on image for
larger view.
We can handle any project, large or small, from one piece to hundreds of
parts. Contact Optec for a prompt and courteous quote on your next
laser engraving project.
