Optec, Inc.
How to Order - LPV
Price List
LPV Transmissometer
- Of course, the technical manual and papers in the Publication
pages need to be read and understood. The LPV requires much advanced
preparation if the installation is going to be successful. Call Optec
and we will review your application and requirements.
- The standard
transmitter side usually consists of the transmitter (#86210) mounted
inside the All Weather Environmental Enclosure (#86670) which in turn
is placed on the Permanent Mounting Pier (#86670). In addition, the
NEMA enclosed power supply (#86905) is used to power the unit. Connectors
parts are supplied with the unit for the user to make the power cable
going from the enclosure to the power supply. Optec can make this
cable for a slight additional charge if requested.
- Other items to
consider for the transmitter are: extra lamps (#86252), Field Tripod
(#86230) for calibration, heat regulated window (#86679) for the enclosure
to prevent fogging.
- The standard receiver side usually consists of
the receiver (#86205) mounted inside the All Weather Environmental
Enclosure (#86670) which in turn is placed on the Permanent Mounting
Pier (#86670). This arrangement is only compatible with the 58mm f/6
telescope (#86220) which is adequate for path lengths up to 7 km.
The heat regulated window (#86679) for the enclosure should also be
considered if fogging is going to be a problem on the glass.
- The receiver
computer controller does not go into the enclosure and has to be mounted
in a controlled enviroment space near the data logging equipment.
Connector parts are supplied as standard for the user to construct
a cable to connect the enclosure to the receiver controller. Optec
can make this cable for a slight additional charge if requested.
- Since
the computer controller is located in an inside space, the 10A Switching
Power Supply (#88905) not mounted in a NEMA box is adequate for power.
- For calibration purposes, the Calibration ND FIlter and Holder (#86225)
is also necessary. However, for multiple instrument purchases, only
one Calibration ND FIlter is necessary.
Optec can assist with advice and equipment for the installation of a LPV monitioring site. However, our involvement is limited and on-site participation is not possible. If your require on-site assistance or a complete turn-key installation including our products, data loggers, solar power, heated lab sheds, etc., we at Optec recommend Air Resource Specialist, Inc.