SSP Accessories

Store your valuable instrument in a solid hardwood case made by our master machinest Ron Vander Werff in his spare time. Ron uses various Michigan hardwoods such as elm, walnut, oak or maple supplied from a local wood mill. The case contains enough room for the instrument, power supply, PC cable and extra filter sliders. A rechargable dessicant container keeps the instrument dry. A neoprene gasket keeps all dust from entering the case. All brass hardware. Quality American made for a change!

#17200 SSP-3 or SSP-4
#17205 SSP-5
#17210 SSP-3A
#17215 SSP-5A

Null modem cable with female DB-9 connectors on both ends. This cable is need to connect the SSP to the COM port of a computer.

#17154 6-feet
#17155 10-feet
#17156 15-feet
#17157 25-feet
custom lengths available

4-Port USB to Serial Converter adapts the SSP serial output to a USB 2.0 interface. Four seperate COM ports allow all of the Optec instruments to interface to a single USB port.

#17691

IMPORTANT: Not all USB-to-Serial converters are compatible with Optec software. We have found that those with the FTDI chip set are compatible and the models Optec sells use this chip set. Those with the Prolific chip set are not compatible. This limitation only effects Optec control software and not the software from other parties such as CCDSoft or MaximDL.