IFW Accessories - page 2
Optec, Inc.
TELESCOPE MOUNTS FOR THE IFW FILTER WHEEL - cont.
IFW Information
Navigator
#17459 - 2-inch barrel mount. Fits any 2" ID focuser. Length of mount is 2-inches.
#17653 - 0.5-inch extender. This adapter is placed bewteen the telescope mount and TCF-S to extend the length for providing greater clearance with regards to the focusing knobs of some telescope.
MOUNTING RINGS FOR THE IFW FILTER WHEEL
Mounting rings screw into the back plate of the IFW and allow for the attachment of focusing mounts and cameras. The most common item to attach is the TCF-S focuser which uses #17461.
#17460 - Universal mounting ring. Allows any 2-inch diameter device to connect to the IFW. Three thumbscrews located 120 degrees apart provide suitable clamping force. Total length is 2 inches.
#17461 - TCF-S mounting ring. The TCF-S focuser can connect to the IFW with this mounting ring.
#17462 - JMI MotoFocus mounting ring. Allows the JMI model NGF-S motorized focuser to attach to the IFW.
#17463 - ST-1001E mounting ring. Special two part mounting adapter to fit the SBIG model ST-1001E camera to the IFW. Attaches to the camera by means of four socket cap screws.
#17464 - SCT short thread mounting ring. Allows cameras that make use of the popular 2" SCT thread common to Meade and Celestron telescopes able to connect to the IFW.
#17465 - T-thread mounting ring. Most CCD cameras including the popular SBIG line make use of this thread for the front face plate.
#17466 - C-thread mounting ring. Many small format CCD cameras and closed circuit video cameras make use of this small ( 1-inch diameter by 32 TPI) thread size.
No Picture
Click on picture for larger view
IFW Accessories
Navigator
#17467 - SCT long thread mounting ring. This adapter allows accessories that fit the popular 2' SCT thread common to Meade and Celestron telescopes to connect to the IFW.
No Picture
#17468 - Pentax camera thread mounting ring.
No Picture
