IFW Accessories page 4

#17359 - IFW filter wheel carrying and storage case. Case is made from selected Michigan hardwoods such as black walnut, elm, hickory, cherry and red oak by our master machinist, Ron Vander Werff, in his idle moments which are few indeed. The solid wood boards are acquired from a local mill and are hand selected by Ron. Each case holds up to 4 filter wheels in absolute safety for storage or transport. A filter wheel wheel fully loaded with 5 filters could easily cost over $1000 dollars. Perhaps it might not be a good idea to just put them in a spare Tupperware salad container. Finest case available anywhere with brass hardware and Neoprene dust gasket.

The control cable is comprisedof an eight wire CAT 5 cable with a RJ-45 connector on one end and a 9-pin sub-D connector on the other. The RJ-45 connector is inserted into a mating jack in the IFW control box. The sub-D connector is connected to the mating connector on the IFW motor housing plate. Various standard lengths are available from stock. Custom lengths up to 100 feet are also available on special order.

#17470 - 6-foot control cable

#17471 - 12-foot control cable

#17472 - 25-foot control cable

#17473 - 50-foot control cable

#17474 - Custom length control cable up to 100 feet