Optec, Inc.
IFW Information
Navigator
IFW 3" Accessories - page 6
#17807 - 3-inch to AstroPhysics 2.7-inch mount. This mounting adapter offers the popular female side of the AP thread to attach accessories.
#17804 - 3-inch to 2-inch reducer bushing. This adapter allows all of the 2-inch size camera mounts and other 2-inch adapters to fit the IFW 3".
#17805 - 3-inch to Optec 2.4" mount. In order to accommodate the TCF-S, this short adapter will rigidly attach the TCF-S to the 3-inch camera side port of the IFW 3".
#17806 - 3-inch to STL camera mount. The STL line of cameras from SBIG support some of the largest CCD chips available. The usual T-thread mount adapter does not have enough clear aperture to accommodate these chips without vignetting. This adapter uses the 4-bolt holes in the front plate of the STL to secure the mount giving a full 2 inches I.D. close to the CCD.
MOUNTING ADAPTERS for IFW 3" Camera Side
#17813 - 3-inch to Starlight 3.5-inch focuser model 3545 adapter mount with male thread. Allows accessories designed to scew on the back of the Starlight focuser to fit the IFW 3".
#17811 - 3-inch to Optec 3.6-inch mount. This mount has a 3-inch O.D. barrel on one side and a 3.6-inch diameter with dovetail on the other. It will allow any of the 3-inch line Optec instruments to fit the 3-inch I.D. drawtube. The TCF-S3 or Pyxis 3-inch can be attached in this way.
IFW Accessories
Navigator
Click on picture to see larger view
