IFW Accessories - page 2
Optec, Inc.
TELESCOPE MOUNTS FOR THE IFW FILTER WHEEL - cont.
IFW Information
Navigator
#17459 - 2-inch barrel mount. Fits any 2" ID focuser. Length of mount is 2-inches.
#17653 - 0.5-inch extender. This adapter is placed bewteen the telescope mount
and TCF-S to extend the length for providing greater clearance with regards
to the focusing knobs of some telescope.
MOUNTING RINGS FOR THE IFW FILTER WHEEL
Mounting rings screw into the back plate of the IFW and allow for the attachment
of focusing mounts and cameras. The most common item to attach is the TCF-S
focuser which uses #17461.
#17460 - Universal mounting ring. Allows any 2-inch diameter device to connect
to the IFW. Three thumbscrews located 120 degrees apart provide suitable clamping
force. Total length is 2 inches.
#17461 - TCF-S mounting ring. The TCF-S focuser can connect to the IFW with
this mounting ring.
#17462 - JMI MotoFocus mounting ring. Allows the JMI model NGF-S motorized focuser
to attach to the IFW.
#17463 - ST-1001E mounting ring. Special two part mounting adapter to fit the
SBIG model ST-1001E camera to the IFW. Attaches to the camera by means of four
socket cap screws.
#17464 - SCT short thread mounting ring. Allows cameras that make use of the
popular 2" SCT thread common to Meade and Celestron telescopes able to connect
to the IFW.
#17465 - T-thread mounting ring. Most CCD cameras including the popular SBIG
line make use of this thread for the front face plate.
#17466 - C-thread mounting ring. Many small format CCD cameras and closed circuit
video cameras make use of this small ( 1-inch diameter by 32 TPI) thread size.
No Picture
Click on picture for larger view
IFW Accessories
Navigator
#17467 - SCT long thread mounting ring. This adapter allows accessories that
fit the popular 2' SCT thread common to Meade and Celestron telescopes to connect
to the IFW.
No Picture
#17468 - Pentax camera thread mounting ring.
No Picture
