OPTEC-2300 Camera Adapters
A work in progress...
We are developing a full product catalog to make your instrument and adapter selection even easier. With hundreds of adapters we will work to place them on our new website as quickly as possible. In the meantime, don't hesitate to call for assistance.
OPTEC-2300 Dovetail Mount
Camera side Adapters for the Pyxis 2-inch rotator.
Optec 2.3" Dovetail Mount
The OPTEC-2300 circular dovetail mount is used by NextGEN line of telecompressors, the Pyxis 2-inch camera field rotator, the IFW 2-inch filter wheel, and the Perseus 4-port Instrument Selector.
These mounts allow easy connections from any of these devices to a variety of camera mount. One side of each adapter below has the Optec 2.3" dovetail mount and the other side presents a camera specific mount, such as the T-thread, or C-mount. If your camera or accessory is not listed, do not hesitate to call. We are constantly adding new adapters to our catalog.
Each camera mount below is held in place with three setscrews and can be adjusted a full 360-degrees for best rotational alignment.
#17646
|
#17647
|
#17648
|
#17657
|
#17649
|
#17654
|
#17644
|
#17643
|
Additional Resources
If
you cannot find the exact stock adapter to fit between your
telescope and imaging train components, visit PreciseParts.
The
Build-An-Adapter application allows you to select two
devices to connect and choose an appropriate length to maintain any back-focus
considerations. Orders are usually filled within a week or so
and each adapter is guaranteed to fit.
