Lepus HD - C11 EdgeHD Edition
Lepus 0.62X telecompressor lens designed especially for use with the Celestron EdgeHD C11 OTA. A large 3-1/4 -inch Celestron thread screws directly on to the rear cell thread of the C1100 EdgeHD telescope.
For use with any Lepus or VLC camera mount having the OPTEC-2100 2.1-inch dovetail receiver.
See Lepus Camera Mount table for recommended length camera mount.
Celestron EdgeHD C1100 OTA shown with Lepus-HD and Canon DSLR.
Telescope-Side Compatibility:
- fits Celestron 3-1/4" male thread.
Camera-Side Compatibility:
- Lepus camera-specific mount. See this table for supported cameras.
User Images and Reviews:
 Astronomy
Technology Today review of the EdgeHD C11 and Lepus
combination. Content and link courtesy Astronomy
Technology Today and Dr. Klaus Brasch - 2012 |
 |
Bill
Shaheen's review of the Lepus telecompressor with his Celestron EdgeHD
C11 telescope. Bill was an early adoptor and helped to inspire
development of the Lepus-HD specific models for the Celestron EdgeHD
telescopes.
Bill writes: "I'm pleased to report that, overall, I found the reducer to produce very satisfying images, resulting in a reduction factor of 0.69x."
Link and review courtesy William Shaheen.
Back-Focus Diagram:
| #19411 Lepus-HD
C11 Edition diagram
showing the optimal back-focus distance to image sensor. |
|
How to Order:
Contact any Optec dealer, call Toll-Free 1-888-488-0381, email, or click the button below to order directly through Paypal.
